17 Reasons Not To Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will prevent unnecessary repair costs as well as improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double-paned windows which are held together by internal beading, it is harder to remove and replace the panes that were previously in use. In this situation you'll need find some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you're planning to attempt to remove the window panes by yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.

It's a great idea seal the gap after the glass has been removed. This will prevent water and drafts from entering your property until a professional arrives to repair the window. This will also provide an obstacle to stop criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer an alarm system that includes a window. This will give you the best of both.

2. Sagging

upvc window repairs near me is durable, energy-efficient and affordable alternative to timber sash windows. As time passes, they may develop a variety of issues, including sliding. A sagging window in uPVC can cause problems with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are falling down.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've adjusted the hinges, close the window and test it for fitting. If you're satisfied with the fit of your window repairs near me, you can tighten screws to hold them in place.

If you are unable to move the hinges, you could need to replace the seal. As time passes, rubber seals lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's essential to replace the seal as quickly as possible to ensure your uPVC windows are watertight and draught-proof.

UPVC handles can also loosen up. The majority of the time it is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform an initial fitting. The corners of the sash need to align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

It is essential to act if you get up each morning to find a smoky wall and wet floors. The leaks of water from windows do are not just a cause for degrading of the structure of your home but also undermine your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem is, the old caulking may need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Check that any drainage holes are free of debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open in a breeze it could be hinges at fault. These are easily repaired by any skilled DIYer and can usually be completed in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and like any mechanical part they will wear out over time. It is very easy to change a window hinge but it's much easier if someone else helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain manner or because of inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to give suggestions.

It is also important to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the possibility of a window repairs near me sticking and prevent corrosion. This should be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. First, the hinges because of wear and tear, could become misaligned. This can cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it might be required to realign them. The interlock, which is located on the hinge of the window, can also become misaligned, again it is possible to give them a clean but in some cases it might be necessary to have them replaced.

The next common cause of draughts is the window seals. These can become worn down or damaged over time and allow air to escape through these gaps. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are typically made of fabric which are filled with a type of filler. They can be placed on the top of your windowsill. These will help to stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair, your upvc window repair near me windows will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it is always recommended to seek assistance from a professional as soon as possible.